How To Install Wired Xbox 360 Controller On Pc

Information technology wasn't that long ago that trying to connect a controller to your PC was either incommunicable or y'all needed plenty of wires and cords to get it done. However, new technology has finally made it easier to connect your controller to your PC by using Bluetooth and similar methods.

Syncing your Xbox 360 Controller is not an exception, and even older models should connect to your laptop or desktop without besides much trouble. Hither is a basic rundown of how to connect an Xbox 360 controller to your PC.

Farther reading:

• How to connect a PS4 controller to a PC
• How to connect an Xbox One controller to a PC
• How to connect a Switch controller to a PC

Plug in your wireless receiver

This section only applies to those with wireless controllers. If you've got a wired Xbox 360 controller, skip straight toInstall software.

For those of you that own wireless Xbox 360 controllers, connecting to a PC isn't as straightforward as just plugging in the device. Kickoff off, you'll need to purchase a capable receiver, then run the proper setup sorcerer.

If you don't already have a receiver, they typically cost between $10 and $20. The official Microsoft version will cost a bit more than that, only at that place are many third-party versions bachelor that work perfectly well.

Later purchasing the wireless receiver, connect it to a compatible USB port on your calculator (see Effigy A below). Once plugged in, a green low-cal volition appear on the receiver indicating the device is working properly.

Install software

For the wireless gaming receiver and the wireless Xbox 360 controller to properly sync with i another, users must download the necessary software via Microsoft'south website, or the bundled installation disc packaged with their receiver.

If you have the aforementioned installation CD (probably not, but information technology'southward possible), insert it into your PC'southward main optical drive and follow the on-screen magician. You may need to restart your computer. If non, you can download from the Xbox 360 Wireless Controller for Windows link; if wired, select Xbox 360 Controller for Windows instead. Cull which version of Microsoft Windows y'all're using — the Windows vii drivers will work for Windows 8 and Windows 10 — select the operating system language and click Download.

In one case the download screen pops up, hit Runand allow the Xbox 360 Accessories Setup program to install the required files. Again, you may exist required to restart your computer upon completion of the install.

Syncing the controller

If you're using a wired controller, just plug it in. You're good to go. Coil down toTesting the Controller to make sure everything is working correctly.

If not, y'all'll need to connect the wireless Xbox 360 controller with the receiver plugged into your calculator. To practice so, start plow on the controller past property down the Xbox Guide button in the center of the controller, and wait for the green backlight to turn on. Afterward, press the connect button on top of the wireless receiver (Figure B) until information technology begins to wink green, then press the corresponding button on your controller (Figure C).

The pairing process should only take a few seconds, after which the low-cal on the receiver will render to solid light-green and one of the 4 corners around the controller's Guide button will light up (Figure D). If you lot're still having issues, check Microsoft's support page for more aid.

Testing the controller

Once the necessary software is installed and the controller plugged in or synced, it'southward time to test the connection. Open the Outset carte du jour on your PC, click the search menu, and look for "game controllers." You should see an option that reads: Set USB game controllers.

To ensure that your controller is performance properly, examination it past turning the joysticks, pulling on the triggers, and pressing all the buttons. If everything is working correctly, you'll come across the corresponding activeness highlighted in the app. Your system should reflect when every push button is pushed. If it's reflecting all of your actions, information technology doesn't matter which area of the screen is lighting up.

If your app isn't fully pairing with your controller and certain buttons aren't lighting up the screen, you tin can check out Xbox'southward back up website  for detailed troubleshooting tips.

Start Playing

To keep things convenient, the company labeled the Xbox 360 controller equally the default setup for most new PC games. You probable won't need to play around with settings or set up cardinal bindings to start playing.

We recommend that you check that your controller is fully paired while you load your game because if the ii devices aren't continued, the game won't recognize your controller. Some newer games support quick and convenient controller changes; Users can switch to 360 controllers, fifty-fifty if they're in the centre of playing.

Editors' Recommendations

• Best Xbox Alive Gold deals for Apr 2022
• The best Xbox Series 10 and Serial Due south deals for April 2022
• Best Xbox One controller deals for April 2022
• The best Razer deals for March 2022
• Best gaming PC deals for March 2022

Source: https://www.digitaltrends.com/gaming/how-to-connect-your-xbox-360-controller-to-a-pc/

Posted by: andersonthumbeth1938.blogspot.com

Share this post